Not recommended for beginners

The Zega Mame Boy Advance SP / Gameboy Zero Project kit is the newest addition including 4 button support, Shoulder Buttons and Audio Jack

Included:

• Mainboard
• LCD PCB
• 3.2" LCD (Pre-soldered)
• LCD Flat Ribbon Cable
• 2 x Shoulder Buttons (Pre-soldered)
• 1 x Headphone Jack (Pre-soldered)
• 1 x Volume Wheel (Pre-soldered)
• 11 x Low Profile Button Contacts (Pre-soldered)
• Your Raspberry Pi

Not Included:

• Lens
• Hinges
• Speaker
• Shell
• Buttons
• Button Rubbers
• Battery
• Raspberry Pi
• SD Card

If choosing the unsoldered kit, you will be required to solder:

• 3.2" LCD (Surface mount, included)
• Tigger buttons x 2 (Through-hole, included)
• Volume Wheel (Through-hole, included)
• Audio Jack (Through Hole, included but optional)
• 11 x Tactile front facing Input buttons (Included)
• 1 x Battery Connector (Included)
• Your Raspberry Pi

Please ensure you are confident in your soldering ability to attempt this project. Under no circumstances will any refunds be made if soldering has been attempted.
Pre-soldering does not include the Raspberry Pi if purchased as part of this kit.

Please note: Fitting the audio jack will prevent use of a standard SP battery and you will need to source a smaller battery

* Pre-configured images provided on an SD Card do not contain Roms